Channel Mode: GSM channel mode, one of:
- FR = Voice, Full Rate
- EFR = Voice, Enhanced Full Rate
- HR = Voice, Half Rate
- AFR = Voice, AMR Full Rate
- AHR = Voice, AMR Half Rate
- CSD = Circuit-switched data
- SIG = Signaling only
TCH ARFCN: Traffic Channel (TCH ARFCN) or Stand-alone Dedicated Control Channel (SDCCH ARFCN) or Packet Dedicated Traffic Channel (PDTCH ARFCN). Hopping channels are shown one at a time.
RLT: Radio Link Timeout, ratio of current value to maximum (= start) value, expressed in percent.
RxQual: Receive Bit Error Rate, RxQual.
Timeslots: List of timeslots in use,
Timing Adv: Timing Advance.
MS TxPower: UE Transmit Power (dBm).
Channel Type: Channel type, one of {BCCH, PBCCH, PDTCH, SDCCH, TCH/F, TCH/H}.
Subchannel: Sub channel Number {0 ... 7}.
Ciphering: Ciphering Mode, one of {A5/1, A5/2, A5/3, GEA/1, GEA/2}.
Hopping: Identifies whether the current traffic channel has a hopping (1) or non-hopping (0) frequency set.
HSN: Hopping Sequence Number {0 ... 63}. Identifies the hopping sequence number to be used by the mobile when assigned to a hopping traffic channel on the serving cell.
MAIO: MAIO, Mobile Allocation Index Offset {0 ... 63}. Identifies the mobile allocation index number to be used by the mobile when assigned to a hopping traffic channel on the serving cell.
Speech Codec DL/UL:
Voice codec and codec rate of downlink and up link.
Speech Quality DL/UL: AMR Speech Quality Indicator {Speech Good, Speech Degraded, Onset, SID First, SID Update, SID bad, Null Data.}
|
