The LTE MIMO fragment display as two parts

The first part is radio matrix of different carriers, PCC and SCC(Primary and secondary) of different antennas.

MIMO Tx/Rx: this display the eNB Tx and Rx antenna number of PCC and SCC. Such as 2x2, 4x2, 4x4, according to your NodeB configurations.

RSSI 0/1: this identifies RSSI info of different antenna in different carriers, primary or secondary.

SINR 0/1: this identifies SINR info of different antenna in different carriers, primary or secondary.

RSRP 0/1: this identifies RSRP info of different antenna in different carriers, primary or secondary.

RSRQ 0/1: this identifies RSRQ info of different antenna in different carriers, primary or secondary.

The second part shows the NodeB Tx Differences

The view shows the difference in transmit power between the eNodeB’s Tx1 and Tx2 antennas (average taken over Rx1 and Rx2 receiver antennas). Each presented value is further averaged over samples in the time domain. Given for each carrier separately in case of carrier aggregation.

EARFCN means the carriers of NodeB, Frame timing shows arrived timing of NodeB to different antenna. The difference shows the signal strength differences between two antennas received from NodeB (RSRP Rx1 –RSRP Rx2).